KOLBUS NM 100 from 2014

Angled grooving machine for paste board, providing a one-piece board with routed grooves to allow for the hinged joint of hard book covers, slip cases, calendar stands & luxury presentation boxes.<>Features:<>• Sturdy, versatile box components thanks to smooth grooving cuts, through to a minimal last<>board/paper layer.<>• Special grooving knives can be set to cut 90° – 130° angles.<>• Grooving knives are adjustable from the outside of the machine.<>• Knife positioning device with digital indicator<>• Precise positioning up to 1/10 mm<>• Large format machine<>• 100% angled boxes, sharp edges and smooth groove surface<>Specification:<>Double magazine for parallel processing of two board blanks<>1. blank Max.: 455 x 455 mm Max: 580 x 330 mm<>2. blank dependent on the width of the 1st blank, max. < 250 mm in amount max.: 910 mm<>• Suitable for cardboard or slightly curved cardboard with punched corners<>• Swivel slides in alignment operation for precise alignment of the cardboards.<>The swivel pushers are particularly recommended for smaller alignment edges, for example landscape format, large differences in the aspect ratio or corners that have been punched out beforehand.<>Board thickness: Min. 1 mm | Max. 4 mm<>Number of grooves per cycle: 1 – 8 grooves in running direction<>Distance single groove: Min. 1 mm<>Distance double groove to double groove: 40mm<>Net production is subject to sizes, materials etc.