• Remote control: ink and register - PQC IV <>• paper thickness 0.07 - 0.3 mm • <>maximum printing area 705 x 1,020 mm • <>ink system • number of coating rollers 4 • <>diameters of coating rollers 87.5 - 77.5 - 85 – 90 (mm) • <>number of rollers 21 (lower unit) and 20 (upper unit) • <>stack height • feeder 1,430 mm • delivery 1,430 mm • <>remote adjustment of diagonal register (cocking) • <>semi-automatic plate change in the upper unit • <>semi-automatic plate change in the lower unit • <>AMR print job presetting device paper size and thickness presetting, brush presetting on the feeder table / take-up roller presetting, feeder side blowing presetting, side straightener presetting and sheet drum brake position • <>side stack adjustment of the feeder (via the sliding feeder) • <>remote adjustment of the suckers height • <>ionization device on the feeder and the delivery • <>side and front mark and fiber optic printing detector • <>sheet anti-blocking device (air cylinder mechanism) • <>remote diagonal pre-gripper adjustment • <>motor drive of dampening roller • <>spring loaded ink roller nip follower • <>water-cooled oscillating Inkers • <>inking roller timing control from PQC IV • <>coating rollers with axial spread: 2 x B and 2 x D for the upper and lower units separately • <>coating roller dampening driven by a gear set with reduced speed • <>load roller on coating roller with axial movement driven by a gear set • diagonal adjustment of the dampening solution tray • detection and alarm device for dampening solution level • <>chrome-plated form roller • <>chrome-plated pressure roller (with special surface coating) • <>chrome-plated offset roller • motor-driven cam for releasing sheets in the delivery unit • <>automatic lubrication of the delivery unit chain • <>detector of accumulation of sheets in the delivery unit • c<>ombined technotrans Beta system. C 300L for cooling the dampening solution and tempering the ink (including combicontrol 4.3 aquados c 5 and inserted tank) • <>PQC overhead lighting • <>complete APC system for changing printing plates for the upper and lower units instead of the "Semi APC" system. • <>PDC-S (print density control) Spectrodensitometer, which is part of the system, reads and measures the control color strips and subsequently transmits both optical density values and spectral data to CIElab • <>automatic feedback of results facilitates precise and easy modification of the settings of individual zones of the ink box • <>KHS (Komori High Performance System) - intelligent system for activating and deactivating the ink box system for easy adjustment of the coloring and saving waste paper •<>KOMORIMATIC dampening system<>Technotrans refrigeration<>APC automatic plate changing system<>Automatic blanket, roller and impression-cylinder washing device<>High pile delivery<>Grafix powder sprayer<>KMS-IV management system<>AMR preset device for sheet size + thickness<>Ultrasonic double sheet control